919219405567 919219405567
M/S Shalabh (India) Industries

MCB Distribution Board

MCB Distribution Board

Product Details

Features Special incoming Brass Terminals to ensure perfect connections
Condition New
Packaging Can be packed as per client requirement
Min. Order Quantity As per client requirement

A distribution Board (or panel board) is a component of an electricity supply system which divides an electrical power feed into subsidiary circuits, while providing a protective fuse or circuit breaker for each circuit, in a common enclosure. Normally, a main switch, and in recent boards, one or more Residual-current devices (RCD) or Residual Current Breakers with Overcurrent protection (RCBO), will also be incorporated.

Due to multifold increase in consumption of electrical energy in every field, there is need for safety against short circuit and overload current; hence the use of MCBs and isolators in any power distribution network is necessitated.

'Shalabh Switchgear' offers an economical and practical solution to consultant's and designer's problem of providing comprehensive solution in a demanding situation with its unique salient features with widest range.

  • MCB Distribution Boards are made of special grade CRCA steel sheet and thermoplastics to provide longer life to enclosures and protection against all type of weather conditions
  • Enclosures are phospatised through seven-tank hot process to ensure required and smooth coating of phosphates scaled with chromatic layer to ensure strong powder coating adhesion to the surface to make it rust retardant in all indoor and outdoor weather conditions
  • Boards are made by use of latest techniques of powder coating using epoxy polyester resin based powder to ensure strong, scratch resistant coating


  • The current carrying parts are made of electrolytic grade of copper and over rated to carry high currents, keeping temperature rise and distribution losses minimum
  • Copper bus-bar per phase according to number of outgoings sufficient to carry 100/200 A current load
  • Special incoming Brass Terminals to ensure perfect connections of incoming cable with the bus-bars
  • Brass neutral bars isolated and insulated from the enclosures with suitable sectional area
  • Earth Bars for better and firm earthing to facilitate individual earthing for each outgoing terminals
  • DIN Rail to facilitate easy and fast mounting of MCB's, load-isolators, etc. As per IS â�� 11039
  • Circuit identification chart, Circuit numbering and circuit nomenclature stickers and provided for all types of SPN and TPN Distribution Boards


Type Configuration Applications SPN SPN Simple, Economical & Safe Distribution Consumer Simple, Economical & Safe Distribution Double Door Simple, Economical & Safe Distribution TPN TPN (Horizontal) Three Phase & Neutral incoming and outgoing can be only in single phase 2-in-1 Can be used with single or three phase bus-bar Vertical Three phase & neutral incoming and outgoing can be single phase as well as multi phase Per Phase Isolation DP RCCP in each phase is provided to avoid the total isolation as only the phase where earth leakage fault exists, get isolated. Special Extended Loose Wire Most Flexible design Three Tier Most Flexible Design Power Line For Fault level higher than 10 KA with a provision for MCCB incomer Phase Selector Fitted with changeover switches dually wired Plug & Socket Used for air conditioner and motor protection MCB Enclosures To Isolate/connection electrical appliances independently

Exclusive Range of MCB Distribution Boards

  • SP&N Distribution Boards
  • Single & Double Door, Flush Mounting Type
  • Available in 4, 6, 8, 10, 12 & 16 ways

Double Door DBS

  • All SPN, TPN Horizontal and TPN Vertical DBs are designed for complete weather protection and elegantly designed for better aesthetics

To enquire about the desired product(s), just check the box and then click �Inquiry Now� button which is provided below.

Yes! I am interested

Submit Your Requirement

  • Explore More Products

Looking for "MCB Distribution Board" ?